2026 Show Gallery

The Texan, Colton Owen, Perrin, TX

This chest was constructed of solid Walnut along with Hickory and Walnut Veneer. This piece was created with subtle curves throughout the piece to make it more pleasing to the eye. The lid is constructed with the Baltic Birch plywood and veneered on both sides with a solid Walnut border. When you open the box, you will notice the inside is all Walnut except the bottom. The artist did this to give the inside of the chest a different contrast compared to the outside. The Texas star was constructed out of dyed Poplar Veneer and dyed Sycamore Veneer, which was then inlayed into the top of the lid using a few different techniques. To finish the box, the artist used several coats of an oil-based finish to bring out its natural colors and to provide a good durable sheen.

Emerging Artist

$3,850

The Poem Table, Max Niemiec, Richardson, TX

Round walnut table with a geometrically sculptural base intended to be an artistic comment on reality. Appearing broken and unstable from every point of view, there is a harmony and balance that cannot be seen from any single perspective.

Contemporary Style

$7,500

Enlightened, Roger Ellison, San Angelo, TX

A simple reversing mathematical curve defines the lines of this contemporary yet timeless sophisticated curvaceous coffee/cocktail table. Each of the five tabletops mimics the same curve as does the complex understructure; the only exceptions are the curved cutouts for the lower tabletop placements and the eight vertical legs which themselves have a coved facing. All structural members, other than the solid white oak legs, are laminations clad with shop-made quartersawn white oak veneers. The entirety of that understructure is fumed. The visually striking upper tabletops are surfaced and edged with book-matched black and white ebony veneers, also known as royal ebony (Diospyros malabarica). Fumed book-matched eucalyptus covers and edges the lower two surfaces. The much smaller central surface is veneered with a rich bee's wing eucalyptus, also fumed. Underneath each of the five tabletops is a secondary veneer of book-matched red oak. Enlightened is finished with hand-rubbed Waterlox.

Contemporary Style

$14,000

Half Scale Jelly Cupboard, Bruce Phillips, Garden Ridge, TX

A shaker inspired jelly cupboard constructed of highly figured spalted pecan and black walnut. The cupboard is one half scale from an actual chest and is intended to be used in an infant's nursery. The piece can then later transition for use in the young child's bed-room. The joinery is traditional mortise and tenon and the finish is a hard oil wax.

Traditional Style

Not for sale

Blossoming River Coffee Table, Jason Hodges, Kerrville, TX

The Blossoming River Coffee Table was created from a single slab of locally sourced mesquite. This artist wanted a different take on the classic river table. They drew inspiration from our own Guadalupe River. Using charcoal tinted resin for depth and contrast to the reddish hues of the wood, They inlayed dried and pressed foliage to evoke rivers as a source of life. Inset powder-coated steel legs by Flowline Design Rounded top edge and chamfered bottom with oblong corners Hardwax finish with Ceramic nano top-coat.

Emerging Artist

$2,500

Chest of Drawers, Charles Borland, Katy, TX

This chest of drawers was inspired by a piece by Steward Wurtz as shown in Fine Wood-working, June 2015. The original concepts are from Nakashima. The artist designed the chest on a 3D program (Sketchup) which allowed for many of the details to be worked out before starting the build along with a detail parts list. The piece is made from four different types of wood including an American Walnut case, Curly Cherry drawer fronts, hand carved Wenge handles and drawers made of Poplar.

Contemporary Category

$5,000

Dining Room Buffet, Brian Pate, Conroe, TX

A traditional-inspired buffet in rift-sawn White Oak, featuring frame-and-panel construction, inset joinery, box-jointed drawers, and hand-carved detail. Finished in Rubio Mono-coat Plus 2C. Designed to balance traditional form with restrained, intentional detail.

Emerging Artist

Not for sale

Greene and Greene Inspired Cocktail Table, Mark Seay, Plano, TX

Constructed using Sapele hardwood and Figured Sapele veneer and Inspired by the works of the famous architects, Charles and Henry Greene and their collaboration with furniture and millwork craftsmen, John and Peter Hall, I designed this hexagonal based Cocktail Table with distinct elements of the "Greene and Greene" style. The leg indent details are inspired by the famous Blacker House chair. Another distinct element in my design are the use of ebony accents which are "pillowed" to give the classic Greene and Greene detail. The Hexagon design is carried over in the table top design with the center veneered panel bordered in solid wood. The finish is a multi-layered hand rubbed oil followed by rubbing out the finish with a fine beeswax and carnauba wax blend.

Traditional

$4,375

Polaris Lamps, Matt Beal, Sachse, TX

The Polaris Lamps are a monument to the grandeur and beauty of creation, and the glory of its Creator, here presented as a matching set showcasing scenes from Colorado and Alaska. Imagine standing in the shadow of soaring mountain peaks, hearing the thunderous roar of a glacial waterfall, and watching a million glints of light flow down mountain streams as if the sun itself was running into the moraines below. See proud elk grazing in the last of the summer sun and mighty whales bursting from the sea in a display of pure power and joy.
Each of these scenes is a composite glass panel made of approximately 75-150 individual pieces of stained glass, painstakingly fit and locked in place with traditional lead caming and glazing cement. Starting with photographs personally taken by Matt on various adventures (whale photo credit to Bill Eichenlaub, public domain), the layout of each panel takes shape via a digital process as an overlay designed to bring out the essence of the scene. This overlay is reproduced at full scale and used to make the individual glass pieces which are then fit together as a single unit. Following this the panels are cemented, cleaned, and polished before finally being mounted within the lamp itself.
The stained glass panels are held within a thin frame of solid white oak that projects a light, airy feel with a midcentury flare and joined with traditional methods. The main lamp body appears to float over the base via a custom-fabricated steel frame that also doubles as mounting points for the power supply and dimmer for the LED lamps. The LEDs themselves are housed within aluminum channels mounted at each interior corner of the lamp body to ensure each side receives ample backlighting. Wood stain and clear top coats are all water-based by General Finishes. The internal steel frame is powder coated in a bronze finish from Columbia Coatings. Brass hardware and a custom power cord with foot switch and woven cover complement the overall fit and finish of the piece.
The entirety of the design, from joinery to artwork, was done by hand by Matt in his home studio in Sachse, TX. Nearly all components (except for the LEDs and related parts) were either custom fabricated by Matt in his workshop or sourced from manufacturers and makers in the United States of America. Glass sourced from Oceanside Glass in California, Mississippi Glass, and Wissmach glass out of West Virginia. Colorado scenes are locations in and around Rocky Mountain National Park (Moraine Park, Endovalley, and Alluvial Fan). Alaska scenes are locations near Juneau and Denali National Park (Juneau, Nugget Falls at Mendenhall Glacier, Talkeetna Range, and College Fjord). No Al was used or consulted at any point in the creation of this work.=

Home Accents

Not For Sale

Sculptural Stained Glass Lamp, Don Russell and Rob Walker, Medina, TX

Having such a dramatic shape, it should be considered more a lighted sculpture than simply a lamp. It is meant to live on a table near a window and be backlit naturally during the day, then slim LED spotlights take over in the evening to provide a gentle colorful glow.
A collaboration between The Workshop and Rob Walker: Don Russell/The Workshop designed and built the structure plus electrics, while Rob Walker laid out and manufactured the stained glass. Months ago Rob made a series of really interesting recycled bar-rel-stave pieces to hang in the windows, and the artist proposed making one with LED lighting mounted as a tabletop piece.

Home Accents

$1,750

Streamline/Rustic Moderne Desk, Don Russell, Medina, TX

Constructed using Sapele hardwood and Figured Sapele veneer and Inspired by the works of the famous architects, Charles and Henry Greene and their collaboration with furniture and millwork craftsmen, John and Peter Hall, I designed this hexagonal based Cocktail Table with distinct elements of the "Greene and Greene" style. The leg indent details are inspired by the famous Blacker House chair. Another distinct element in my design are the use of ebony accents which are "pillowed" to give the classic Greene and Greene detail. The Hexagon design is carried over in the table top design with the center veneered panel bordered in solid wood. The finish is a multi-layered hand rubbed oil followed by rubbing out the finish with a fine beeswax and carnauba wax blend.

Traditional Style

$4,200

Sculpted Rocking Chair, Kenan Schultz, Baytown, TX

This sculpted rocking chair was inspired by Sam Maloof. The artist used some 80 year old Mahogany and White Oak Burl for the seat and crest rail. They carved a Spanish mission and inlayed it on the back of the crest rail. The artist also hand cut Texas Star button inlays and put them in the arm rests. They also carved a mouse on the bottom of the front leg.
There are little design elements peppered throughout the chair.

Contemporary Style

$13,000

Fossilized Ammonite, Kenan Schultz, Baytown, TX

The artist used some wormy Pecan that they harvested after Hurricane Ike came through
Houston. The artist utilized the worn trails along with my carving and texturing of the piece to give a fossilized appearance. The artist bleached the piece using Daley's 2 part wood bleach to get the desired effect and finished it with a water based matte finish. The artist mounted the Ammonite on an ebonized Mora wood base.

Home Accents

$1,200

Pieces of Eight, Jon Percy, Austin, TX

Three pieces combine this single suite designed to be a comfortable place to read a book, watch TV, knit or just enjoy a beverage. All are made from solid Mahogany and have been hand shaped to form. The octagonal legs were all hand planed to shape and the seat was hand formed with scorp and travisher. The pieces are finished with a blend of oil, Tung oil and mineral spirits followed by wax.

Contemporary Style

$2,500

Entry/Hall Shelf, Carl Homeier, Blanco, TX

Entry/hall 4-tiered wood/glass shelving

Emerging Artist

 $1,800

Hepplelitto, Leo Litto, Austin, TX

This mahogany sideboard is inspired by the designs of the highly sought after British maker George Hepplewhite, whose mid-18th century work demonstrated the move away from high baroque excesses toward the calm, elegant restraint of the early neo-classical. In this modern version, all of the panel parts are made from highest quality veneered plywood which eliminates the potential for seasonal movement and the concomitant deleterious effects one sees in antique furniture. The top, legs, and forward stretchers are the only solid wood components. Traditional joinery techniques are complemented by modern adhesives and a tough, durable clear conversion varnish finish on all surfaces. This is a true heirloom piece of furniture that will stand the test of time.
Genuine mahogany, satinwood, macassar ebony, maple, and holly.

Traditional Style

$29,900

Side Table, Olaf Alexander, Denton, TX

Entry/hall 4-tiered wood/glass shelving

Emerging Artist

 $555

Wine Rack, Jonathon LeBlanc, Houston, TX

The artist recently came into possession of some 50 year old curly California Redwood from Alamo Hardwoods. In order to match the grain pattern, they had to cut the Redwood into small strips. They used the Redwood strips to make this minimal wood wine rack. For the past several years, the artist has been making furniture with some very beautiful Magnolia Burl that was sourced from a tree toppled over by a storm in the Houston area. They had one piece of the Magnolia burl left and thought that it would make a magnificent top for the wine rack.

Traditional Style

$1,800

Comfort, Jonathon LeBlanc, Houston, TX

This artist has always wanted to make a chair. They attempted many designs that look good but were not especially comfortable. Building to the principle of comfort first, this chair is as comfortable as could be made. The frame is genuine Mahogany. The decorative panels are figured Texas Pecan. The upholstery was completed in Spring, Texas.

Contemporary Style

 $3,500

The Cliff, Jonathon LeBlanc, Houston, TX

The artists father would often stop by their shop every day to see what they were making. He has very good taste and is an accomplished woodworker. Several years ago, the artist made a decorative piece that resembled a sail, ever since then, whenever his father sees a piece of good-looking scrap, He would point to it and say, "Make a sail." The artist did not make a sail, they made a cliff from a piece of Magnolia Burl and Mesquite. The artist hope's he enjoys it as much as they enjoyed making it.

Home Accents

$350

Occam's Exception, Bobby Price, McKinney, TX

This custom writing desk balances technical geometry with fluid, organic grace. Named Occam's Exception, it deliberately bypasses the simple path, in favor of compound angles, complex joinery and a meticulously sculpted silhouette. Dark walnut flows continuously around figured maple drawers, sitting on cherry legs, concealing an obsession with tight tolerances behind an approachable form. It is a piece where engineering dissolves into a timeless, elegant centerpiece of functional art.

Contemporary Style

 Not for sale

Texas Star, Jonathon LeBlanc, Houston, TX

The artist has always been partial to strikingly patterned wood. The door panel is Texas Pecan and Wenge. The star is from a piece of driftwood found on Galveston Beach. Frame and cabinet are made from Mesquite.

Texas Style

$850

Frame and Panel Blanket Chest, Travis Johnston, Hutto, TX

The frame is made from cherry. The floating panels are made from solid curly maple.
Joinery is mortise-and-tenon. There are 40 total tenons, 16 of which are wedged, thru tenons. The chest is finished with shellac and the interior base is lined with (unfinished) aromatic eastern red cedar.

Contemporary Style

$1,750

Brass Tray Coffee Table, Pierre McCarble, Houston, TX

An elliptical coffee table using bending plywood, mahogany and birch veneers, beech columns, decorated with water based acrylic and metallic paints and finished with shellac and varnish, and detailed with black marker pen.

Art Style

Not for sale

Garrarmand Floor Lamp, Matthew Kressin, Austin, TX

The creation of this piece began with the idea of building lamp shades from non-traditional materials. After some trial and error, The artist developed the form of the shade with its concentric rings and adjustable "petals". They felt the form was a combination of both the organic and the industrial, the straight and the curved, pairing wood and metal. The artist decided to merge their interpretation of Art Nouveau and Arts and Crafts furniture to create the support the shade needed to function as a floor lamp. In this, there are bent laminate curves and softened edges that are paired with sturdy wood elements doweled together in the Craftsman style. The piece is made from walnut and walnut veneered plywood. It is finished in OSMO hard wax oil.

Home Accents

 $2,600.00

Table ARTUR, Stefan Kleinhans, Johnson City, TX

Table top: Pecan
Table frame: Aluminum, powder coated with stainless steel trim.
Table feet: Stainless steel round plates. Height adjustable to approx. 2.76"

Contemporary Style

 $14,700.00

Wild Goose Chase, Thomas Manbeck, Dallas, TX

Wild Goose Chase tells the story of a young boy who is chasing a goose. When the doors open, the boy quickly learns his lesson. The cabinet functions well, with 20 wine bottle slots, glasses and accessories. The internal panel folds down to act as a serving tray enhancing functionality.
Primarily made of Cherry and Maple with Wenge, Spanish Cedar and Walnut accents; all hardware is solid brass. The artist used green milk paint to add depth to several areas.
All joinery is hand cut, the marquetry is cut using double bevel technique and curved pieces are created using bent lamination. A lot of components are shaped by hand including the wine glass racks, drawers and legs.

Art Style

 $9,500.00

Ultimate Fly-Tying Cabinet, Wayne Delyea, Granbury, TX

For many years I have wanted to make what I consider the Ultimate Fly-Tying Cabinet and this is what I came up with. I always do the artwork first so I started with making a drawing of 2 Brown Trout in a Mountain Stream. The Marquetry on the Cabinet door is my own original design. All of the wood veneers used are their natural grain and color with the exception of the 2 shades of Blue wood for water, the Red and the Yellows are dyed.
30 different Veneer Woods from all over the world were used to make the Marquetry on the door: Of the 30 wood veneers only 4 are dyed vs their natural color. The Water is made of 2 types of dyed Light and Dark Blue Koto, the Fly is dyed Red Koto, dyed Yellow Koto and dyed Black Koto. The ultra-thin fishing line was made using an 8/1000th thick blade and filled back with dark 2-part Unibond-800 which dries hard as glass and dark Brown.
The door features a one-of-a-kind hand sculpted Spalted Tamarind pull as well as my signature hidden opposing magnet door catch and stop. Other all natural color veneer woods used are Pepperwood Burl, Ziricote, Santos Rosewood, Quilted Makore, Red Sycamore, Black Walnut, Birdseye Maple, Lacewood (large figure), Quilted Sycamore, Poplar, Quilted Maple, Kewazinga Bubinga, Red Gum, Satin Ceylon, Lacewood (small figured), Fumed Oak, Peruvian Walnut, Black Stripe Ebony, Walnut Burl, Brazilian Walnut, Zebra Wood Pomelle Sapele and Pomelle Makore.
The cabinet frame, top, bottom and shelf are all solid Black Walnut. The Fly Tying Station is made of solid Black Walnut on the top and Quilted Maple on the bottom. The sides are Birdseye Maple. The bottom Drawer is solid Black Walnut and Quilted Maple with hand cut dovetails and a custom Spalted Tamarind drawer pull.
The large bottom Black Walnut Shelf is to allow plenty of storage for Rod Tubes. The Fly Tying Station glides out of the cabinet allowing someone to sit on a stool and work. When the work is completed the whole thing glides back into the cabinet to wait until next time. The dark Walnut circles on the Maple Bottom are Magnetized to hold tools and hooks etc... securely while you're working. The same goes for the Maple circles on the Walnut Top Shelf. There is also plenty of storage for spools on the 18 posts along the back and for small parts and tools on the entire station. The entire Fly-tying station glides on top-of-the-line Soft Close Blum Drawer hardware built to last.

Art Style

 $8,850

Karen Jewelry Cabinet, Wayne Delyea, Granbury, TX

The artist named this all-original design and hand made Jewelry Cabinet "Karen", after his wife and best friend of 37 years. She will always be his inspiration to create beautiful things. The Door features an original design Marquetry of Dogwood flowers. Legend of the Dogwood has it that Jesus was crucified on across of made of Dogwood.
God was so angry he made it so the Dogwood would never again grow to a size it could be used for a crucifixion and would forever more be the First Flower of every Spring.
The Door pull is made of a 94 year old 1932 Nickel hand forged into a drawer pull. Inside the cabinet features a small drawer for rings, earrings etc. made of Beautifully figured Maple with a tiny Gold plated Drawer Pull. On the inside of the door there is a Necklace and Bracelet hanger front and center for easy access.
There is also a motion activated LED Light on the inside top that illuminates when the door opens. It is rechargeable and lasts for hours. The cabinet is all solid Peruvian Walnut.

Home Accents

 $858

Ladies Fripperies Cabinet, Damian Kemper, Utopia, TX

This homage to the Art Deco period is a statement piece designed for the discerning lady. Topped with a display cabinet enclosing adjustable glass shelves and a built-in drawer for jewelry. The framed glass doors share one central knob surrounded by a turned mahogany escutcheon. Suspended in a stirrup over the classically inspired pedestal base, the floating lower banks serves as a lingerie chest with velvet lined drawers. The drawers are faced with centrally mounted turned knobs and escutcheons complimenting the detail of the upper cabinet the entire piece is wrapped in luxurious sapele, mahogany, and rosewood veneer cut at opposing angles to provide visual texture. Additional contrast is provided by ebonized wenge accents throughout.

Traditional Style

 $8,000.00

Vintatone XL, Damian Kemper, Utopia, TX

Using modern speaker engineering and wrapped in tone woods, the Vintatone XL may look vintage, but the sounds is anything but! Two forward-firing 3-way drivers provide clarity & nuance while opposing passive diaphragms give surprising depth and warmth.
The chassis is encased in walnut and features rosewood inlay throughout. The precision cut grille and bezels highlight the piece while idle and the eye is drawn to the walnut burl waterfall. As with the rest of the piece, the waterfall is enhanced by continuous rosewood inlay on its sides. The grille is removable for service, although delicate in appearance, it is solidly constructed of laminated walnut and wrapped in a continuous veneer. The Vintatone XL is finished hand-rubbed polyurethane and hand-polished lacquer to enhance the beauty of the woods.

Traditional Style

 $2,200.00

Texas Wildflower Bookcase, Mark Deschner, Fischer, TX

Made of Walnut and Maple, the case features four separate shelves for books and de-cor. Each shelf has a sliding panel that displays a hand -cut marquetry panel of a native Texas wildflower (Indian Paintbrush, Bluebonnet, Indian Blanket, Mexican Hat). Recessed curves are used throughout the case and sliding panels as a repeating design ele-ment. The case sits on a solid walnut base with round legs.

Contemporary Style

 $5,200

Golden-Cheeked Warbler Cabinet in Mesquite, Mark Deschner, Fischer, TX

This cabinet on-stand features a hand-cut, double bevel marquetry picture that spans the sliding door and individual drawers. The picture is of the endangered Golden Cheeked Warbler in a Huisache bush.
The materials used are: Maple, Ebony, Osage Orange, Alder, Walnut, and White Oak.
This cabinet maintains live edges on the top and bottom panels, as well as on the stretchers of the leg assembly, and wedged square tenons.

Texas Style

 $6,300.00

Medium Rocking Chair, Tom Choate, Horseshoe Bay, TX

Medium rocking chair made from Koa and flexing lamented back braces. Artist used a lot of handwork and shaping with angle grinder, rasps, spoke shave, etc. Hand rubbed with a satin-poly finish.
Editor of Britan's Furniture and Cabinet magazine called it the most comfortable wooden chair he's ever sat in and everyone who sits in it agrees.
This chair is available in three sizes: small, medium and large.

Traditional Style

 $3,800

Large Rocking Chair, Tom Choate, Horseshoe Bay, TX

Large rocking chair made from Curly Maple with Walnut accents and flexing lamented back braces. Artist used a lot of handwork and shaping with angle grinder, rasps, spoke shave, etc. Hand rubbed with a satin-poly finish.
Editor of Britan's Furniture and Cabinet magazine called it the most comfortable wooden chair he's ever sat in and everyone who sits in it agrees.
This chair is available in three sizes: small, medium and large.

Traditional Style

$3,800

Rocking Chair, Tom Choate, Horseshoe Bay, TX

Medium Hal Taylor designed rocking chair in figured Walnut with Maple accents and flexing lamented back braces. Artist used a lot of handwork and shaping with angle grinder, rasps, spoke shave, etc. Hand rubbed with a satin-poly finish.
Editor of Britan's Furniture and Cabinet magazine called it the most comfortable wooden chair he's ever sat in and everyone who sits in it agrees.
This chair is available in three sizes: small, medium and large

Traditional Style

 $3,800

Texas Ebony End Table, Mark Duff, San Antonio, TX

Solid book-matched Texas ebony end table. The finish is rubbed Odies oil.

Traditional Style

Not for sale

Maloof Inspired Lowback, Chad Metcalf, Austin, TX

This Maloof-inspired lowback chair is crafted from walnut with contrasting wenge dowels.
Inspired by Sam Maloof's iconic designs, it emphasizes flowing curves, sculpted joinery, and the seamless transition between form and function. The chair features a coopered seat and traditional Maloof-style joinery. Built using a combination of hand tools and modern machinery, the chair is hand-sculpted to create a cohesive, organic form. Finished with Odie's Oil to highlight the natural beauty of the wood.

Traditional Style

 $4,000

Bloom Jewelry Box, Sam Francis, Austin, TX

A flower-inspired swiveling jewelry box. Two staggered rows of curved drawers appear as petals from above. The grain of the drawer fronts forms a continuous wave pattern around the piece. Each drawer is lined with anti-tarnish fabric. Four feature curved dividers and two include earring pillows. Twelve walnut wedges merge to form a cylindrical stem with uniform grain rising from the base. Necklace hooks surround a top compartment. A beveled mirror lines the lid. Brass hardware by Brusso.

Emerging Artist

Not for sale

De Mezquite, Monty Duff, Austin, TX

This 36"x 36" seat was carved from a partially rotting/burled mesquite stump from a dying tree. It is one solid piece and weighs 250-300lbs. Some black epoxy/resin was used to fill voids and to harden some of the rotted sections. Chisels, grinders, rotary tools, were all used shape.

Art Style

  $18,500.00

The Tall Companion, Luke Okey, Fair Oaks Ranch, TX

The Tall Companion is crafted from Black Walnut and Ash, finished with Rubio Mono-coat Oil Plus 2C Pure to enhance the natural wood grain. Box joints, faux breadboard-style doors, and continuous grain drawers with splined miter joints showcase its craftsmanship. All handles are maker turned and pieced. The soft rounded edges, tall legs, and arched stretcher design complement two drawers, a graduated-width slated lower shelf, and internal half shelf for practical storage.

Emerging Artist

 $1,500.00

Black Walnut Live Edge Loveseat, Debu Dasgupta, Boerne, TX

Nature's beauty lies in its imperfection and asymmetry seen regularly in wood grain of live edge pieces. This piece was designed to highlight the natural grain pattern, while accommodating the asymmetry and variance in size of the two ends of the live edge slab. In keeping with the theme of natural imperfections, The artist intentionally kept some of the distressed and rustic look of the final product.

Contemporary Style

Not for sale

Trestle of Life, Saima Siddiqui, San Antonio, TX

Trestle of Life reflects the balance of being human. Four sculpted legs represent our emotional, ethical, spiritual, and intellectual selves. Natural cracks are left untouched or highlighted with gold epoxy, inspired by kintsugiour imperfections make us imperfectly perfect. A maple-inlaid chessboard and two integrated drawers with CNC-sculpted walnut and maple pieces represent life's choices: we cannot always choose our position, but we can choose our next move.

Emerging Artist

 $4,500.00

Table, Warren Demaree, Mason, TX

Artist utilized Indiana Black Walnut, Curly Maple, Mahogany, Gabon, Macaser Ebony, Rosewood as well as Pa Duke. Absolute black granite base with quartz feet. Inlay is Mahogany and Maple. Finished in Polyurethane over Shellac.

Art Style

   $4,800.00

Hill Country Coffee Table, David Vickery, Liberty Hill, TX

I see an owl in the rich grain of the tabletop, but you may see something entirely different! This table is made primarily of Texas Pecan and Honey Mesquite, with a touch of Bald Cypress in the leg assembly. I sourced the pecan and mesquite from Berdoll Sawmill and used traditional hand-cut joinery and hide glue. I mixed some of the hide glue with sawdust to fill in the larger knot holes, preserving the character of the wood.
The finish combines Tried & True oil, shellac, and wax.

Emerging Artist

 $2,400.00

Pecan Entry Table, David Vickery, Liberty Hill, TX

This simple entry table is a perfect place to empty your pockets at the end of the day. It features a Texas Pecan slab top with a hand-carved tray and Mesquite inlays. The drawer is crafted from spalted pecan, walnut, cherry and aromatic eastern red cedar. Slender, ebonized red oak legs give the piece a clean, understated look. I finished this table with oil and wax.

Emerging Artist

SOLD -  $1,200.00

Pecan Entry Table, David Vickery, Liberty Hill, TX

The artist designed this table with a particular attention to proportion and the subtle repetition of forms inspired by the Arts and Crafts movement. This table brings together a Berdoll Sawmill sourced book-matched Texas Pecan top with Honey Mesquite and Tremont wrought nails. The table is made primarily with hand tools and traditional joinery. It is finished with Tried & True varnish oil and wax.

Emerging Artist

 $2,600.00

Fiddle & Pedestal, Joe Martin, Fort Stockton, TX

Fiddle is loosely based on a violin built by Stradivarius called Medici. Top plate is made from. Quarter sawn spruce. Fingerboard, pegs end piece and end button are ebony. Finished in natural wood Finished with violin shellac. Bottom plate and ribs are maple.

Traditional Style

Not for sale

Sapele Stairway Vessel, Len Roberts, San Antonio, TX

"Sapele Stairway Vessel" is made with my sapele stairway design in maple with a maple floating bottom. It has 24 pieces per ring for a total of 600 pieces. The finish is Osmo Satin oil. Inspiration came from Native American designs.

Home Accents

 $1,990.00

Ash and Walnut Coffee Table, Craig Spacek, Austin, TX

This table features a top crafted from ash veneer, sourced by the maker from a locally harvested tree. The natural figure of the wood is beautifully highlighted, creating a unique and organic surface. The legs are constructed using bent laminated walnut, offering a defined and open form while preserving an informal, grounded and inviting feel.

Contemporary Style

 $2,350.00

Occasional Table, Monty Humble, West Lake Hills, TX

Occasional table. Live edge mesquite slab on matte black metal base. Epoxy finish. Embedded pieces of barbed wire visible as tree was used as a fence post many years ago.

Emerging Artist

Not for sale

Round Walnut Table, Jess McConnell, Houston, TX

This solid walnut dining table draws on mid-century modern design. The top is assembled from four mitered quadrants, with contrasting grain directions and crossing character grain at the center. The base was designed to complement chairs already purchased by the owners, Murray and Christina Smith. Murray collaborated on the design and assisted with the build. Finished with Rubio Monocoat Pure to highlight the walnut's natural color and grain.

Contemporary Style

 Not for sale

Hall Table, Jess McConnell, Houston, TX

This hall table combines a live-edge olive slab with walnut that waterfalls over the front and ends. Gold leaf follows the seam between the olive and walnut, and a carved walnut inlay adds detail to the front. Live-edge mesquite slabs form the legs, supported by a base of walnut and Texas limestone. The narrow proportions bring together contrasting woods, natural edges and stone in a functional piece. The wood is finished with Rubio Monocoat Pure.

Art Style

 $6,250.00

Leaf Table, Jess McConnell, Houston, TX

This East Indian rosewood tabletop had been owned by a family for almost 30 years and was headed for disposal. Originally sold as 'iron wood,' it was stripped and given a new design, drawn freehand across the surface. Copper wire forms the branching stems, with authentic Navajo turquoise used for the leaf inlays. The design leaves the rosewood's grain visible around and between the branches. Flowyline legs complete the table, and Rubio Monocoat Pure brings out the wood's natural color and figure.

Art Style

 $3,750.00

Autumn's Treasure, Gerald Tobola, Round Top, TX

The copper leaves are handmade by using the repousse and chasing technique. The colors were achieved by using acids and metal coatings. The trees are made with a silicone/caulk compound and a gold metal coating was applied for color, on a wooden panel.

Home Accents

 $1,295.00

Seasons Remembered, Gerald Tobola, Round Top, TX

The copper leaves are handmade by using the repousse and chasing technique. The colors were achieved by using acids and metal coatings. The trees are made with a silicone/caulk compound and a gold metal coating was applied for color, on a wooden panel.

Home Accents

 $1,995

Lowboy Dresser, Richard Huber, Dallas, TX

This Newport-style lowboy dressing table is crafted from quarter-sawn Sapele. Its rich figure complements the graceful proportions and sculptural elegance of its Queen Anne cabriole legs. Traditional craftsmanship is expressed throughout its construction: hand-cut dovetails and mortise-and-tenon joinery unite the cabinet and legs, while the internal framework incorporates doweled connections and loose tenons secured by distinctive Wenge wedges through the back. The drawers feature poplar sides with Sapele fronts, joined with dovetails and embellished with a hand-carved shell inspired by John Townsend's celebrated 1762 Newport lowboy dressing table. Turned drop finials punctuate the cabinet skirt. The top is meticulously hand-filed to achieve its final contours and secured to the cabinet with dowels. A hand-rubbed Danish oil finish enriches the Sapele's natural color and figure, completing a piece that brings the refinement of Newport furniture tradition into a contemporary work of fine craftsmanship.

Traditional Style

Not for sale

Webb Bench in Flame Birch, Gary Weeks & Co, Wimberley, TX

The base is flame Birch. Birch can be quiet until you catch the grain at the right angle, becoming something else entirely with figure that moves across the surface like open flame.
Finished in Danish oil.
Black leather upholstery by our collaborator, Ron Malaguti

Contemporary Style

$1,700

Webb Barstols in Chery, Gary Weeks & Co, Wimberley, TX

The Webb Barstool grew out of the artists Webb Dining Chair design.The base is solid cherry, shaped and sculpted by hand. The strapped seat is shown in brown and black Saddle leather.
Finished with three coats of Danish Oil.

Contemporary Style

 $1,250.00

From the Heart, Zak Mo, Houston, TX

Houston From the Heart Emerging Artist The artist chose a heart motif because he believes truly good work comes from the heart- when you put your all into something.
Inspired by an Iranian art called Katham Kari, the table top inlay consists of roughly 9000 pieces of wood. Each one was individually planed and only 2mm (0.08 in) wide.
The inlay process took about 200 hours, and design work 9 months. The legs are tapered in traditional shaker style, and attached by mortise and tenon pinned joints.

Emerging Artist

Not for sale